Difficult to make a choice for your new Built-in Extractor Hood? We have written this Special Buyer's Guide Built-in Extractor Hood to help you, with the TOP10 best sellers of the moment, tests, opinions... As in all our shopping guidesWe have done our utmost to help you choose the best Built-in Extractor Hood!
Our selection of built-in extractor hoods
Buying guide for built-in extractor hoods
Modern kitchens are usually very spoiled when it comes to equipment, as the major appliance manufacturers are not only looking to simplify the tasks of cooks. They are also thinking about the design of a clean and healthy environmentIt is with this in mind that extractor hoods were invented. It is a device that consists of an extraction cone, one or more filters and a fan. Thanks to the system of extraction and evacuation or recycling of air, an extractor hood can absorb gas, toxic aerosols, odours, humidity, vapours and cooking fumes. It will then recycle or evacuate them outside. Are you interested in this type of device? In this guide and comparison, we will give you the criteria you need to take into account if you wish to acquire one. Focus!
The different types of extractor hoods
There are many models of extractor hoods currently on the market. If we refer to their modes of extraction, a distinction is made between: extraction hoods, recycling hoods, mixed hoods, perimeter extraction hoods and central extraction hoods. Otherwise, it should be noted that a hood can be attached to a wall or a corner to form a wall or corner hood, but it can also be suspended on an island.
For example, we can differentiate between: a cap hood, a built-in hood and a decorative hood such as a decorative chimney hood or a decorative wall-mounted hotpoint hood. But here we are talking mainly about built-in extractor hoods, which some people also call cupboard hoods and which are among the most useful appliances in a kitchen.
What types of built-in extractor hoods are available?
There are different types of hoods that can be integrated or built-in:
- The retractable hood or removable hood
- The hood of the filtering group or suction group
- The worktop hood
- The ceiling hood
- The telescopic hood or drawer hood
It's a hood that goes up between two high cabinets You can also recess it into a piece of furniture, always high up. This device has a front panel that can be tilted to turn it on. Generally speaking, a hood of this type measures 60 x 40 x 27 cmIt is important to know that if you install it at the wrong height, the folding surface could get in the way when you are cooking.
In terms of discretion, the hood takes first place, because when it is not in operation, it is the most important thing. completely invisibleThis advantage can be further optimised if you opt for a front that matches the style of your kitchen furniture.
This type of extractor hood is also characterised by its particularity of being integrated into a kitchen wall cabinet. It can be made invisible if a decorative chimney or a type of masonry or wooden hood is fitted. The width of this type of extractor hood generally varies between 50 and 90 cm.
This is a hood that can be integrated into the worktop, directly behind or to the sides of the hob. One of the advantages of this type of installation is that it is both unobtrusive and modernYou can install it if you have a kitchen with a minimum of equipment or if you have a central island. Models of 60 to 90 cm of width are available on the market.
We are talking about a hood that has the same installation principle as another model of filter unit type. However, here, the device is integrated into the ceiling or false ceiling, as its name indicates. Its discretion is therefore no longer to be demonstrated. As for dimensions, you can find models of 50 to 120 cm Since it is placed high up, this hood can be controlled by remote control.
Compared to other types of hoods, it has a greater air extraction capacity. If you have a large kitchen, it will be perfectly suited to your needs. To be totally effective, a ceiling hood must be placed at a suitable distance from the work surface. To find out if your installation respects this rule, it is best to refer to the technical data sheet.
The drawer hood also fits into a tall cabinet in your kitchen. It is also inconspicuous, as it only reveals the control panel when it is inactive. When you want to operate it, simply slide the drawer forward. To switch it off, the opposite operation is required.
The majority of hoods have a width of 60 cm and take up little space. 80 and 90 cm Due to its dimensions, this device fits perfectly in a small kitchen.
Selection criteria for a built-in extractor hood
When purchasing your extractor hood, in addition to choosing the type, you must also consider certain criteria in order to benefit from a device that is efficient and provides true comfort of use.
In addition, for several years now, manufacturers have not failed to innovate on each of their products. Indeed, today's hoods are equipped with significant suction and filtration performance. In the same vein, the noise level is seen to be diminishingBut to go into the subject in more detail, here are the criteria that must be taken into account.
The air flow rate
Measured in m3/h, the maximum air flow rate of a hood is its suction capacity or its ability to renew the air in your kitchen. Thus, the flow rate must be adapted to the volume of the kitchen. In concrete terms, therefore, as your kitchen is large, your hood must have a high maximum flow rate. Be aware that devices of this type, which are intended for private individuals, generally have flow rates varying from 150 to 1000 m3/hIn addition, they should be able to renew the ambient air in the kitchen, 10 to 15 times per hour.
That doesn't really help you? Well, you should know that there are simple formulas to find out the exact flow rate required.
- Room volume (H x W x L) x 10 (bottom bracket)
- Room volume (H x W x L) x15 (high range)
With these calculations, you will be able to obtain two values (low and high) in relation to the air flow rate required for the hood to be efficient.
However, if you have an open kitchen or if you regularly grill and fry, it would be ideal to opt for the high end.
While some may confuse flow and power, the latter is the same as the flow rate. motor's electrical output of the appliance expressed in W (Watts). Nevertheless, it is important to note that a very powerful hood may not necessarily be suitable for your kitchen. On this criterion, it is the energy consumption that you will have to look at. Thus, if you want a high-performance appliance, but one that will not exponentially increase your electricity bill, rely on the energy class of the appliance. In this context, we advise you to opt for hoods from class A.
Hood extraction speeds
At the same level as the maximum airflow, the suction speedsDepending on the model, you will find extractor hoods with the following features 2 to 5 speeds.
The presence of these speeds or airflow rates will allow the hood to be adapted to what you are cooking. Indeed, the suction power will be different according to the preparations in order to recycle the air efficiently. For example, for cooking on low fires, the minimum speed is suitable. As for the second speed, you will use it for cooking with higher fires. For speeds beyond the second, they are mainly used when the preparation emits odours, greasy fumes or vapours.
For some models, the presence of an intensive mode function, also called the Time-delayed boosterThis is a handy feature if your kitchen faces a living room and you are cooking meat that will cause a lot of smoke.
The noise level
Please note that depending on the range and model, a fume hood can be quieter or quieterIt can even be unbearable when the equipment is used optimally. It is therefore a criterion not to be taken lightly, especially if the kitchen opens onto a living space.
Expressed in decibels (dB), the noise level will vary according to the characteristics of the hood (power and type of extraction), so the more powerful it is, the louder it will be. You should therefore be aware that quiet models generally make a noise level of 50 dB, while noisier models can exceed 75 dB. If you opt for a hood with a noise level of 60 dB, this is considered comfortable.
The energy label
Like any other household appliance, a built-in extractor hood is required to have an energy label. These are mainly statements that will define the energy efficiency of the appliance. In general, several elements are mentioned:
- The energy class: from A to G
- Annual energy consumption: in kWh
- Cooking zone lighting efficiency
- Noise level: in dB
- Fluidodynamic or steam evacuation efficiency
- Grease filtration efficiency
What are the components of a built-in extractor hood?
To efficiently recycle or exhaust air in a kitchen, a built-in extractor hood has several components.
The grease filter
Whether in disposal or recycling modeGrease filters (1, 2 or 3 in general) are designed to trap grease particles present in steam or cooking smoke. Depending on the model, they can be of various shapes and presentations. However, most of them take the form of cassettes, usually made of aluminium. In this case, they are called cassette filters or metal filters. In some cases, there are filters in the form of a metal grid and others in the form of a synthetic fibre.
The carbon filter
If your hood operates in recycling modeDepending on the manufacturer or dealer, this type of filter may only be available as an option, so it is essential that you check this when you purchase the appliance.
A charcoal filter is designed to deodorize the air before sending it back to your kitchen. In concrete terms, the air will first go through the grease filter before passing through the charcoal filter. Please note that the charcoal filter is not washable and must be replaced every 4 to 6 months depending on the frequency of use. Also, it should be noted that its density determines its capacity to capture odours.
The non-return valve
Also known as backflow preventerThis component prevents heat loss or the infiltration of fresh air into the piping system and blocks the return of greasy vapours into the kitchen.
Generally speaking, this room is provided if you choose a hood that operates in exhaust mode and is located at the outlet of the exhaust system at the roof or facade of your home.
On some high-end models, the motor can be sold separately, with the advantage that you will have the possibility to choose its installation :
- Motor on the body of the hood
- Remote engine
- External engine
It is important to know that an installation with a remote motor can considerably reduce the noise level provided by the unit.
Top Sales !!
Last update: 2020-07-05 02:31:32